Ok, last question before i install my dash.

[Back N Black]

I have a three speed wiper switch and I'm not sure where the wires hook up? Its a new harness and i have
4 wires hanging there, 3 are brown and one is brown with a white tracer. Two of the brown wires are taped together so i assume they connect to the  windshield washer switch. So, that leaves two wires one brown and brown with white tracer. There is two empty male spades left on the 3 speed switch, one at the very bottom and one on left side halfway up the switch. So the big question which wire goes where?
i already looked at the schematic and ? 
Maybe someone has a dash sitting there that can clear it up for me. 

[7dcharger]

Brown with the white tracer goes on the bottom spade, this is a resistor wire that is only used with the 3 speed wiper switch. The other brown wire goes to the spade on the left, it leads to the washer switch.

[Back N Black]

Thank you!