Just had to vent... (battery box progress)

[plum500]

Finally figured out how I am going to vent my trunk battery box. Home Depot plumbing dept, some drilling, large washers I notched and cleared, 3/8" tubing, some repair kit for I am not sure what - but it had large enough washers for underneath these.

Will vent out the passenger side where the normal rubber grommet would be (behind the rear bumper) that the marker wire goes through. This will replace that grommet, and allow for the wire to run through as well - through the notch in the large washers. Should be air tight, solid, and safe. It's intended to be a dry car, but in the event of rain, should still not be a problem - and, it will be hidden.

Anyhoo...