68 taillights resto...

[suburbanfireman]

Pardon me for being the dumb fireman.  I've read this thread twice, and I'm still not understanding the sequence of this process?  Are you spraying clearcoat before the chrome spray?  Does the clearcoat fill in some of the pits like a primer?  Please correct me if I am wrong, but is it 1). primer  2). clearcoat  3). chrome spray  4). clearcoat again?

:yesnod:Those tail lights look great - I would love to give it a try on a rainy weekend.

[Crazy Larry]

Where did you get the LED bulbs!???  I'm buying a set.

At http://www.hitechledproducts.com they are BRIGHT

Those are a great find!

What model # are the ones you used?

Was it the 1156 or the PSC30? And what was the diameter size you went with (I don't have access to my Charger to measure right now)

[DC_1]

Those are a great find!

What model # are the ones you used?

Was it the 1156 or the PSC30? And what was the diameter size you went with (I don't have access to my Charger to measure right now)

I think he used this kit

http://www.hitechledproducts.com/product_info.php?cPath=26_84&products_id=342&osCsid=ad2e17324d7dc45a8e0b7970ff7822e2

[Ricardo]

Very nice work!

[Crazy Larry]

Those are a great find!

What model # are the ones you used?

Was it the 1156 or the PSC30? And what was the diameter size you went with (I don't have access to my Charger to measure right now)

I think he used this kit

http://www.hitechledproducts.com/product_info.php?cPath=26_84&products_id=342&osCsid=ad2e17324d7dc45a8e0b7970ff7822e2

Hey, thanks - I didn't see that one....

I wish they had a better description of the whole package - does it have new wiring and instructions? They need to put the contents in there somewhere.

[NorwayCharger]

They are truly a "bolt On", u can use your old wiring.

[DC_1]

you'll have to post a pic when you get them installed and working.....I would love to see how bright they are.

[SeattleCharger]

   Looks pretty real,   have you tried that on other chrome parts?          

[NorwayCharger]

   Looks pretty real,   have you tried that on other chrome parts?          

Well i have done some plastic trim on a Mitsubishi
I will do my fiberglass front and rear bumper from WS fiberglass, when i get them....

[Needa68]

Concerning the rings that cover the lenses.... From the factory were the ribs on the back of the rings Argent Gray or chrome? The ones I'm working on appeared to be painted gray. I know the tail light assemblies are original and have never been off the car or restored. I'm wondering if it was paint or chrome that came off the ring ribs when I cleaned them.