Axle retainer gaskets/seals . . .

[terrible one]

Anyone know where to get these? They are the seals that go between the axle retainer/ backing plate and the end of the case on the 8.75" rear.

Aaanndd . . . how do I tell if my Timken rollers are shot?

Picture:

[RD]

jackson

check your local autoparts store. i know i have seen those on ebay, but yearone, summit racing, paddock, harden's and mancini racing all sell those.

Jamey

[terrible one]

jackson

check your local autoparts store. i know i have seen those on ebay, but yearone, summit racing, paddock, harden's and mancini racing all sell those.

Jamey

Hey man,

Sadly, I've already dealt with dumbasses at the parts stores who can't turn up ANYTHING! Autozone and O'Reillys. I can't find them on Rock Auto or Summit. Are they called something special?

[RD]

they are called axle flange gaskets

[Back N Black]

Can you use silicone? (gasket maker)

[RD]

just get a sheet of gasket material from your local autoparts store and cut out your own.  i have done this many times.

[gtx6970]

pt numbers
13800 - foam seal gaskets
55032 - steel shim gaskets

2 of each required per car

[y3chargerrt]

http://cgi.ebay.com/ebaymotors/GTX-R-T-CUDA-DODGE-MOPAR-8-3-4-REAR-AXLE-GASKET-SET_W0QQitemZ290223932589QQcmdZViewItem

[jwilk01]

http://www.partsamerica.com/ProductList.aspx?parttype=90&ptset=A&searchfor=Axle+Flange+Gasket

Here they are at advance auto.

Later
Josh

[terrible one]

Got the Ebay ones. Thanks guys! They're almost done building an Advance Auto here. . .