News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

I wanna have my air cleaner powder coated....

Started by TruckDriver, September 16, 2005, 07:45:12 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

TruckDriver

September 16, 2005, 07:45:12 PM
I just had it media blasted, so before I have it powder coated, should I spray it with primer or not? also, does anyone make the rubber ring that does around the inside of the cover? If not, any suggestions to replacing it?
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

moparguy01

#1
September 16, 2005, 08:02:32 PM
if your getting it powdercoated dont prime it. it'll have to come off.
not sure on the rubber.

Drop Top

#2
September 17, 2005, 08:19:09 AM
:iagree: You can buy the rubber at any hardwear store. It's the same seal used for weather striping for door screens. It comes in differant sizes. I believe 1/4 inch will work for you. I have used it many times.

TruckDriver

#3
September 17, 2005, 12:17:20 PM
Thanks guys!
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

y3chargerrt

#4
September 17, 2005, 04:40:15 PM
The rubber ring use to be available at the dealer. I think the part number is 4071703. I think you need to order two to do any of the larder air cleaners.

daytonalo

#5
October 13, 2005, 09:20:37 PM
Leave it bare! Ill powdercoat it for 75 dollars . I have 5 years exp.
Print
Go Up Pages1
User actions