i need this bracket. ya got one

[BigBlockSam]

hi guys
  anybody got one of these brackets laying around that you can sell me thanks Rene

[BigBlockSam]

i also need these

[Blown70]

Can't you just make that?  Sorry that is not a standard part is it?

[BigBlockSam]

i don't have a brake and it's a think piece of metal . that would be great if you can make it for me and i'll buy it from you 

[Blown70]

i don't have a brake and it's a think piece of metal . that would be great if you can make it for me and i'll buy it from you 

Ahhh I see that, yea, I dont have a large enough one to do that right now......... I would be happy to otherwise.

Tom

[Aero426]

i also need these

There's a set of those channels on Ebay right now.  They look very nice.

[A383Wing]

I had to make all of mine for our funny looking pointy nosed purple car.....

Bryan

[hotrod98]

The frame braces don't have to have the offset break in my opinion. I think that you could just shim it up where the offset is. Any fab shop could break those up for cheap. Rene, if you don't find some soon, I may take my set over to my buddy's fab shop and have him make a few sets. Knowing him, he'll probably just go ahead and put the offset in them anyway.

[A383Wing]

Yea..that's what I did with the channel....I shimed it for the offset.

Bryan

[BigBlockSam]

hi
  yea i saw those  frame braces on ebay. seems like a lot of money for what they are . hey hotrod if your gonna make some of those brackets . i'm in. i want to install this nose  . in May. so i gotta get my ass in gear . those are the only two parts i need to complete my daytona. Rene

[hotrod98]

I'll take mine back off of the superbird clone and run them by the fab shop next week.

[BigBlockSam]

I'll take mine back off of the superbird clone and run them by the fab shop next week. 

thanks Larry. that would be cool . Rene

[Howie]

I have a set of upper and lower for a daytona I`ll take off and run down to larrys (hotrod) so they can be made up. Seems everyone has the nose but not all the fixins to put it together.

[BigBlockSam]

 

very , very cool . thanks Howie . its a small part that does a big job . i could make something work but it's nice to have the correct part . Rene

[Old Moparz]

Wow, I don't have any of those parts either & didn't realize it until now. I'd love to get in on getting a set made if it isn't any problem. Would it be possible to have one more set made, Larry? I can send payment before or after, just let me know what you need. I got a set of the wing braces inside the trunk when you did those & they looked great.   

I definitely need to get my Daytona parts "wanted list" together very soon.   

[UFO]

Hey Guys, There are four braces to hold the nose together.The longer one on the bottom of pic spans the C channels and is where the valance bolts to.
(stole this pic from Janek's site)

[hotrod98]

As soon as Howie finds the braces, he's going to ship them to me, I'll take them along with my frame braces over to the fab shop. Prices will be reasonable. 

[moparstuart]

  larry I will need all those also ? not for awhile but i might as well get a set now while i can !    l

[hotrod98]

larry I will need all those also ? not for awhile but i might as well get a set now while i can ! l

I just might have a good deal on an older Janek nose or you. You can look at it when you get down here.

[moparstuart]

   great !

[BigBlockSam]

There are four braces to hold the nose together 

i thought there was 3

[UFO]

The bottom one is for the front mounts on valance and rear of nose.

[hotrod98]

I'll have all four repro'ed soon. Come on Howie...send those parts. We ain't got all day.

[Old Moparz]

Sounds cool Larry, thanks!   

[Howie]

Ok Ok larry! I found the braces. I will get them boxed up and in the mail. I couldn`t remember where I put the top brace :brickwall:then found it last night.

                                                                                                                                                                                                         Howie