Need some help guys.

[charger500az]

Hey guys. I was wondering if someone can post a picture of the inside sail panels of a 1969 Dodge Charger 500 Headliner. We have it the rest of it attatched right but we are having trouble figuring out how to get the correct fit over the sail panels. It's a little different from a normal charger headliner. If you guys could please help me and take some up close pictures of that area, it would be a great help. Thanks.

[69_500]

I'm sure someone will beat me to it, but I'm resizing a photo of the headliner in an unrestored 500. Will be back in about 5 minutes to post photo.

[69_500]

Here is a shot of the passenger side headliner around the sail panel. Hope this is what your asking for.

[69_500]

Are you getting ready to install the headliner in the car now? And I'm assuming your worried about it catching on the teeth of the origional window opening? If so, most of the cars I've looked at have had a piece of interior window trim over those teeth to keep them from catching on the headliner where it crosses them.

[charger500az]

Thanks for the help guys. It is in except it's not flush with the sail panels. Will try again tommorow. I really appreciate the help, pics and advice. You guys rock!

[69_500]

No problem at all. Glad to be able to help someone. I knew that there was a reason that I take photo's of just about every part on cars.

[jackplays2]

If you need to take a look at one you can drive 10 miles to Tempe to see my car and measure, take pictures or whatever you need.  Jack-480-945-3171.

[69_500]

Glad to see your posting on the site Jack. Still trying to work something for you on that car. Trying to pester my dad that is.

Danny

[Magnumcharger]

Same thing...