Are old General Lee wheels worth anything anymore?

[bull]

Someone is making them new again aren't they? I found a set for sale that have a couple BFG tires I want and if I buy them I'll probably just offload them.

They are the American Racing version.

[Charger1973]

Actually I was just talking about that today with someone.  He went looking for the new vectors and apparently they dont make them anymore, it was a limited edition.  So he had a tough time tracking down a set of new ones. 

[bull]

I'll sell him four if he wants them. Two 15x10s and two 15x8s for $100 plus shipping. Of course I have to buy them first.

[daytonalo]

That is scrap price !! Alum is through the roof . If they don't make them anylonger ,sell them for 500 a pair

[Charger1973]

He has the originals just wanted a set of the new ones and he found someone who still had a set (after looking around quite a bit).  Anyway I agree thats a good price, someone should want them. 

[Daytona R/T SE]

I'll sell him four if he wants them. Two 15x10s and two 15x8s for $100 plus shipping. Of course I have to buy them first.

Bull, If you get them and they are in decent shape and they are the 4.5" bolt pattern that fits chargers
( Not unilug ) I'll send you the $100 + shipping. 

[69bronzeT5]

That is scrap price !! Alum is through the roof . If they don't make them anylonger ,sell them for 500 a pair

I could of bought 4 (minus tires) for $400 but they were the new ones

[Mike DC]

 
If a set of Vectors fits this list, they're worth money:


--   MUST be 10 spokes.  No exceptions.

--   14" or 15" diameter, 7" or 8.5" width.

--   Unilugs or true 5-on-4.5" bolt circles are both sellable.



Occasionally someone will buy them in a 14x6" or a 15x10" size. 
But the spoke numbers & bolt patterns are pretty much set in stone (unless you're HLPAG). 



 

[bull]

 
If a set of Vectors fits this list, they're worth money:


--   MUST be 10 spokes.  No exceptions.

--   14" or 15" diameter, 7" or 8.5" width.

--   Unilugs or true 5-on-4.5" bolt circles are both sellable.



Occasionally someone will buy them in a 14x6" or a 15x10" size. 
But the spoke numbers & bolt patterns are pretty much set in stone (unless you're HLPAG). 



 

Sounds good except for the 15x10 size on the one pair.

I'll sell him four if he wants them. Two 15x10s and two 15x8s for $100 plus shipping. Of course I have to buy them first.

Bull, If you get them and they are in decent shape and they are the 4.5" bolt pattern that fits chargers
( Not unilug ) I'll send you the $100 + shipping. 

That picture up top almost looks to me like a unilug setup but it's hard to tell. I emailed the guy and will hopefully see them on Monday or Tuesday.

[Daytona R/T SE]

Bull, If you get them and they are in decent shape and they are the 4.5" bolt pattern that fits chargers
( Not unilug ) I'll send you the $100 + shipping. 

That picture up top almost looks to me like a unilug setup but it's hard to tell. I emailed the guy and will hopefully see them on Monday or Tuesday.

Bull, Check them out and let me know 

[bull]

I will, hopefully tomorrow. I emailed him with a meet time but no word back yet since his initial message. Are you interested in all four if they're not unilug?

[Daytona R/T SE]

I will, hopefully tomorrow. I emailed him with a meet time but no word back yet since his initial message. Are you interested in all four if they're not unilug?

If they're not unilug and if they are the 4.5" Dodge bolt pattern (Charger) and in decent shape, I'll take all four of 'em for the above mentioned price of $100+shipping

[bull]

I will, hopefully tomorrow. I emailed him with a meet time but no word back yet since his initial message. Are you interested in all four if they're not unilug?

If they're not unilug and if they are the 4.5" Dodge bolt pattern (Charger) and in decent shape, I'll take all four of 'em for the above mentioned price of $100+shipping

You have a PM.