News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Superbird Hold Down Plate Reproduction

Started by 1970 RT/SE, March 20, 2008, 05:27:09 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

1970 RT/SE

March 20, 2008, 05:27:09 PM
I had the superbird jack hold down plate reproduced copied from my original. It has not been availible for several years. I had a small run made as they were more expensive to do this time as the firts shop that did them no longer has the press. They are die stamped like the originals and are stamped with two different dies as they have an upper and lower relief.I also had them powder coated so they will hold up nicely. The price will be 150.00 plus shipping. Contact me at the below listed email or phone number.My original is on the right
Mike 860 424-6125
gilead222@comcast.net

BigBlockSam

#1
March 20, 2008, 08:28:50 PM
thats a lot differant then the daytona one . Rene
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

1970 RT/SE

#2
March 21, 2008, 06:17:35 AM
Yes it is, never could understand why they changed as the Superbird one is such intricate piece of work.
Print
Go Up Pages1
User actions