News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Help with charging system and electronic ingnition!!!!

Started by 69charger440, March 12, 2008, 10:29:08 AM

Previous topic - Next topic

69charger440

Well I hope so of you folks can give me some help!!!

I have a 69 charger, it had a one field alternator. I want to change it over to a two field. And make it electronic ignition!! I had a 1975 motor home, and pulled all the components for the electronic ignition and the wiring harness for it! But I am lost when it comes to hooking it all up. Hopefully, someone has done this an can help me out! I have the wiring system schematics, but done know where to add the extra alternator field wires!! Any help would be great. Trying to get it all done, so i can take it to the Mopars at the Strip!!!!!
1969 Charger 540 Blown Hemi 1000HP, 69 Road Runner 500 Stroker 665 HP

71_deputy

you need for sure then a two field alt- old single field will not work.

you need to add a extra wire for the alt- pic shows where.

as for the ing.--- after the ballast resistor you need to add the extra wires for the module and to the coil & dist. pickup unit.
1971 Deputy Challenger 383 4bbl-- 1 of 2 made!!
1967 Charger 440/auto
1973 Road Runner 340/4 speed
2000 1500 Ram Van

69charger440

Thanks

I figured it out just before you sent the reply, but it was helpful!!! It verifies I was correct!!! THANKS. Another problem solved!!! :2thumbs:
1969 Charger 540 Blown Hemi 1000HP, 69 Road Runner 500 Stroker 665 HP

71_deputy

1971 Deputy Challenger 383 4bbl-- 1 of 2 made!!
1967 Charger 440/auto
1973 Road Runner 340/4 speed
2000 1500 Ram Van