Tightening sequence for 383 exhaust manifold

[71 Bee Man]

Hi guys,

I was wondering if there was a particular sequence to follow when tightening up an exhaust manifold on a 383.

Doing the gaskets and want to tighten it properly.

Thanks,

Peter

[Ghoste]

I don't think there is a factory sequence but I generally tighten them from the inside bolts and work out to the ends. 

[71 Bee Man]

I don't think there is a factory sequence but I generally tighten them from the inside bolts and work out to the ends. 

Thanks for that. Just thought I'd check before ripping it apart.

Peter

[firefighter3931]

I don't think there is a factory sequence but I generally tighten them from the inside bolts and work out to the ends. 

Yep....good advice 


Ron