? ? ? ? Can kick down linkage effect the stall RPM ? ? ?

[skip68]

   I put a 3000 stall in my car but still don't have the kick down linkage hooked up.  When I put it in gear it drops some RPM's and if I give it gas it starts going as if there is not a stall converter at all.  The engine does not rev up, it just starts going.   Am I getting to much pressure to the tranny because of the linkage not being hooked up ?   Thank's,   Chuck.......

[skip68]

 

[mally69]

I have a 3000-3500 stall in my car and you don't really know its in there untill you  stomp it then it flashes its stall speed. Mine also does the same thing when i drop it in gear. but I would be hooking that kick down up, or it will fry the clutches.

[Runner]

does the rpm flash higher when your rolling along at idle and hit the gas? can you footbrake the stall higher?   

[john108]

Mally69 - your quote:"I have a 3000-3500"  ---  What brand/model/size torque converter do you have?

[mally69]

Mally69 - your quote:"I have a 3000-3500"  ---  What brand/model/size torque converter do you have?

This is the one that I have. I like it, it is much better than the b&m unit that I had.

  http://store.summitracing.com/partdetail.asp?autofilter=1&part=TCI%2D142200&N=700+4294865449+400252+4294865436+4294908128+4294905607+4294925082+115&autoview=sku