Anyone need a set of wing braces? I have five sets left.

[hotrod98]

I just checked and I have enough parts to make six complete sets of Daytona wing braces. I would like to keep one set just in case I ever build another car. I don't plan to make more after these are gone. I'm not saying I won't ever, just that at this point I have no plans to.

They're identical to the original Daytona wing braces in every way and the uprights are identical to the Superbird versions except the birds have a large washer welded to the top of two of the uprights. The floor brackets are slightly different on the birds but these Daytona brackets can easily be altered to work.

They're $75.00 a set (bare steel) plus $15 shipping in the 48 states. That's dirt cheap.

E-mail me at hotrodcuda98@hotmail.com

[xx29440charger]

I ordered and received a set. Great job! They are awesome! 

[Hemidog]

I emailed you!

[6pkrtse]

I would like a set if you still any available. I will send you a PM.

[200MPH]

pm sent

[Charger-Bodie]

These are the one I used on my clone. They are a VERY nice part,work perfect.

[DoubleDlover]

Hi. do you know why the superbirds have 2 washers on top of 2 of the uprights? I havent seen these on any of the superbirds at teh shows ive been too. thanks

[Charger-Bodie]

The quarter top is mor rounded and would likely be damaged by the edges of the braces when tightend down. That is my guess.