ring gaps to a supercharged application

[srpntlair1]

I am running 440 source 400<451 stroker combo. The file fit rings are set to specified gaps and I am wondering if I went to nitrous or a supercharger, am I gonna have to re-cut ring gaps? I am running an estimated 9.85 CR with a -4 dish piston and an 84 cc head.

[Animal]

The ring gap specification will be supplied with the ring pack , they have to be file fitted dependant on how much boost/nitrous.

[Blown70]

Is that your FINAL CR with boost or static/intial?

[superduperbee]

I use an extra thousandth per inch of bore diameter for ring gap with nitrous.