Steering Column Rubber Gasket

[gasoline_24]

Does anyone know where I can find this gasket?  It is the round black rubber gasket that seals to the firewall plate.

[bear]

paddock sells it in a kit part#sc016 they might sell it seperately also check year one they might have it

[y3chargerrt]

I don't think the seal he is looking for is reproduced.I think he wants the one that goes over the stearing column tube. Its not a gasket more like a thick o-ring.I work with vacuum systems that use many different high quality o-ring. I have a spare stearing column that I will check to see if it has the o-ring on it. If it does I can measure it and find a replacement and order from my company.If I can find a matching one I can probably get it for anyone that needs one. Ron

[gasoline_24]

That is correct.  Let me know what you come up with.  If you need the dimensions I can measure tomorrow and let you know.  I have one, but would like to replace while I have everything apart.

[y3chargerrt]

If you can measure the id and od and thickness of the o ring in metric I can match it up.

[gasoline_24]

ID = 56mm  OD= 73mm appx. (the outside varies in diameter)  and thickness varies from 6 to 9 mm.

[six-tee-nine]

You mean this?

If not check out his store, he's got some great gasket packages....

http://cgi.ebay.com/ebaymotors/DMT-Mopar-B-Body-66-70-Steering-Column-Gasket-Charger_W0QQcmdZViewItemQQcategoryZ42611QQihZ011QQitemZ320121732405

[bull]

ID = 56mm  OD= 73mm appx. (the outside varies in diameter)  and thickness varies from 6 to 9 mm.

I'd like to see a picture of what you guys are talking about.

[y3chargerrt]

This is what we are talking about.

[gasoline_24]

Mine was all smashed.  Can you measure yours and let me know the inside, outside and thickness dimensions.  I got another one, but it looks smaller than yours.

[bull]

What's its function? Dust seal?

[gasoline_24]

Yes, I believe it keeps out dust, water, etc. from coming in between the column and the column mounting plate.  I am still looking for dimensions if anyone has them.

[gasoline_24]

I think this may be what I was looking for.  Any thoughts on if this is the correct part?

http://www.rtspecialties.net/proddetail.asp?prod=2265697

[Charger-Bodie]

I think this may be what I was looking for.  Any thoughts on if this is the correct part?

http://www.rtspecialties.net/proddetail.asp?prod=2265697

I think thats close, but the picture shows a seal for a 62-65 b-body ....I think. 

[gasoline_24]

Why do you say that?  I looked and didn't see anything that said a year.  Did I miss something?

[Chatt69chgr]

It said Early B Body and I think this usually refers to a 62-65 B Body.  The part shown on the steering column just looks like a rubber O Ring.  I am thinking that you could find that at a industrial/mill supply house or place that sells parts for fixing bulldozers, etc.  They probably have a kit of them that you can go though and pick out the one you want.