Motor Mount

[SmashingPunkFan]

 

There is a 5/16 log chain bolted to the head on the left side to keep from tearing out the motor mount. The only reason you would do that is if you had torn out the motor mount from the torque of the engine

I found this guy who is selling his charger like this on eBay

Would this be a big job to fix? or expensive? or difficult? or even last if you tried to fix it?


Thanx!!

[SmashingPunkFan]

Heres a pic of it, please someone? any comments?


Thanx!!

[Just 6T9 CHGR]

Fix what?  The chain is a low buck/old school way to PREVENT breaking the motor mount on the drivers side due to the natural torquing over of the engine.....very common on high torque engines

[SmashingPunkFan]

Cool, thanks for the info.


I just saw that, and I was like "What!?!?" 

But, hey if it works, then so be it.


Thanx again.

PEACE.

[andy74]

Fix what?  The chain is a low buck/old school way to PREVENT breaking the motor mount on the drivers side due to the natural torquing over of the engine.....very common on high torque engines

mine is like that right now,but instead of chain i used a heavy cable with threded ends,and eye hooks,looks better in m y opinion