Looking for a source for Shifter parts.

[Tilar]

First off, if this is not the right place for this, By all means move it to where it needs to be..

I'm looking to repair a shifter that I have, but have no idea where to look for these parts. I have tried the internet and the local dodge dealer. I did manage to find some shifter knobs from the dealer, but that's not going to do me any good if I cant fix the rest of the shifter 

The rubber bushings and the lockout cable are mainly what i'm looking for.

[Chatt69chgr]

Is this the Hurst shifter or the Inland shifter.   I think Hurst will recondition your shifter if you send it to them.  You would be on your own on the Inland.  I would call Brewers Performance and ask them.  If anybody would know, it would be Brewers.

[Ghoste]

It is the Inland shifter in the drawing and Brewers or Passon would both be a good place to start.

[Tilar]

Alright guys, Thanks alot. I'll give them a try.


Edit: I just called Brewers and he told me that all I needed to do was to silver solder a new cable into the existing plunger. I can get that done local.

Thanks again

[poppa]

One of those was on egouge yesterday , I think I went  Dodge Charger-vintage parts - interior-shifter.