News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

68 Dodge Charger Trunk

Started by AllMopar, September 09, 2013, 03:18:58 PM

Previous topic - Next topic

AllMopar

I recently had my trunk pan replaced and car painted by a local body shop.  My question is: I did not realize until recently that they failed to cut the fuel filler neck and vent tube into new trunk. Once realized followed up with body shop and they no longer have the old floor pan.  Can anyone help with dimensions for both fuel neck and vent tube - location and size?

NHCharger

I'll take some measurements for you this weekend if no one has responded by then.
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel

Monziac

68 had 2 different trunks. Mine is the early one. I can template it and drop it in the mail for you if no one else responds?

Thanks,
Jon

NHCharger

First pic I measured from the edge of the flat surface.
Second pic there is a ridge/edge to the driver side of the flat area. I measured from bottom edge.
If you need any additional info let me know.
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel