URGENT - help with green bearings instructions

[71 Bee Man]

 G'day all,

I am just about to install a set of green bearings in my 71 Charger - literally we have the axles on the bench.

Trouble is there's no instructions with the bearing kit. I just want to know what order to install the bits. For example, does the collar slide on first followed by the bearing etc. There is a circlip on the bearing - does the plate go before the circlip or after ?

Does anyone have a drawing or some instructions I can look at as I don't want to put them on the wrong way.

Thanks,

Peter 
Sydney, Australia.

[BROCK]

http://1970chargerregistry.com/Misc/pdffiles/70parts_catalog.pdf

Go to page 121 for the diagram

[John_Kunkel]

The plate goes on first, then bearing is pressed on with the snap ring (circlip) toward the outside (toward the axle flange), then the collar is pressed on. The collar helps hold the bearing in place.

[71 Bee Man]

The plate goes on first, then bearing is pressed on with the snap ring (circlip) toward the outside (toward the axle flange), then the collar is pressed on. The collar helps hold the bearing in place.

Thanks mate.

All done and all appreciated. To be honest, it's pretty commonsense when you've got everything in front of you. It's just that I had the axles at a friends place and we weren't certain at the time.

Peter