Question about yearones 3/4 floor pan?

[Mo Power]

Ok well I need a floor pan for the roadrunner and the rust goes all the way up to where it's glued together or seamed. And I was wondering will the pan go all the way up to that seam or am I going to have to a 2 inch piece out of a junkyard car to go all the length. I hope you guys know what I'm talking about because my drivers pan is shot and heres a pic with the red seam up in upper left corner.

[Hemidog]

not 100% sure about RR's, but most repro floorpans go up to that seam.
http://www.dodgecharger.com/forum/index.php/topic,28429.0.html

[71_Charger_R/T]

Yes the B-body floor pans go up to the seam at the firewall. I would check out "Hardens" as  Year one did not know their product when I had questions about full  VS 3/4 floor pans and their shipping was astronomical too. Hardens told me exact length, width and where it would end short of the seam. (I ended up going with a full length pan on mine)

[Mo Power]

Well I need it to go all the way up to the seam to get rid of all the bad rust and thanks I'll check out Hardens.