Fiberglass trunk caps , how much are they ??

[hotrod98]

I was going to mention that you will need different hinges. Daytonalo made my set. Mike Goyette with Dayclona sells them as well.
Here's a pic of Mike's hinges.

[Charger1973]

Id like to do the cutting on this over the weekend if possible, just not sure whether to go ahead with it or what. 

[dillon14]

Matt,

I would say to try and make it look like the blue one above minus the hinges.

I think that will work.

Al

[dillon14]

Posted by: hotrod98:

I don't have any extra steel closeout panels left, but there are fiberglass versions out there. In fact a couple of guys here on the forum have mentioned making them.

Does anyone out there make these closeout panels that hotrod98 is talking about? If yes, how expensive are they?

Thanks

[hotrod98]

Contact Mike at ...Dayclona1@yahoo.com...or check out his website at... http://www.officialdayclona.com/
He has a couple of the caps in stock at $75 plus shipping. Use panel bonding adhesive and clamp it in place for 12 hours at 70 degrees or higher. Be sure and add some of the adhesive between the deck lid and reinforcement to prevent vibration. Be sure and post pics.

[dillon14]

Contact Mike at ...Dayclona1@yahoo.com...or check out his website at... http://www.officialdayclona.com/
He has a couple of the caps in stock at $75 plus shipping. Use panel bonding adhesive and clamp it in place for 12 hours at 70 degrees or higher. Be sure and add some of the adhesive between the deck lid and reinforcement to prevent vibration. Be sure and post pics.

Thanks,

I'll do this ASAP.

[Charger1973]

Hows this look?

[daytonalo]

That is not a trunk cap Cupcake !!!That is a filler panel or Dutchman panel !!

[Charger1973]

That is not a trunk cap Cupcake !!!That is a filler panel or Dutchman panel !!

Thanks Princess!!!  Im glad you're here to tell me these things!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[BigBlockSam]

yep,  that'll do just fine