DAYTONA UPDATE : PLUG TRIM, SHELF , GLASS , TRIM

[BigBlockSam]

why do you have  headliner teeth on the bottom?

[daytonalo]

Take a look at the part I made , the very top of the channel gets welded to the underside of Vega Glass channel , the next area is for the inside plastic window trim to push on , it is only 20 gauge metal , and I used tin snips to make it similar to the factory teeth . All I did was make 1/4 slits and this is what you get , it holds the trim perfectly . The next area is the shelf for package tray , by the way I will be selling Package trays that work with vega plug , they will have the very similar pattern as orig . The next area on channel is to be welded or screwed to the orig area of car that is behind speaker deck . By the way , I used a different Napa clip than the one I posted before , the one I previously listed had the trim slightly higher than I liked , will post new napa for a small fee  Just kidding , will do it later .Dont forget tabs to attach the int trim corners !!That whole projct took me a while to lay out and make , Make sure the Channel fits tight to the Vega glass channel and the car at the same time without having to pushing down on glass channel to fit , that is so important because then the glass area will be distorted and outside trim wont fit right  Good luck Sunshine !!!!


Larry

[BigBlockSam]

I used a different Napa clip than the one I posted before , the one I previously listed had the trim slightly higher than I liked ,   

hey cuppy , i need that # please . Rene

[daytonalo]

Call me later if it is a matter of life or death


Larry @609-315-2640 ask for the Installation Dept ext 426

[BigBlockSam]

not life or death . i want to order them on monday, thanks Larry

[Daytona Guy]

Great job Larry!!!!!!!!!!!!!!!!!!!!!

[daytonalo]

Thanks Dane !!! Rene is is the shorter Napa Part # for the shorter moulding clip . I orig gave you a part #665-1319 , I found a slightly lower profile clip . part #665-1951 , trust me , I installed backlight and mouldings and the 1951 is a better choice . The will be easy to mix up , they are very close to each other . If you have to attach with a screw because the Vega stud is missing or rusted , pay very close attention to a very , very small head screw to fasten , if not clip will not have spring action .

Larry

[BigBlockSam]

thanks Cuppy ,  i will order them on monday .

[daytonalo]

I HOPE YOU DIDN'T GET YOUR PANTIES IN A BUNCH !!!!

[nh_mopar_fan]

Man, that's nice work!

[BigBlockSam]

I HOPE YOU DIDN'T GET YOUR PANTIES IN A BUNCH !!!!   

i don't where panties! but my thong did get a liitle stinky..

[hotrod98]

I HOPE YOU DIDN'T GET YOUR PANTIES IN A BUNCH !!!!

i don't where panties! but my thong did get a liitle stinky..

That's a mental picture that we didn't need.