News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

bb proform roller rockers

Started by oldsnofear, December 30, 2007, 11:29:56 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

oldsnofear

December 30, 2007, 11:29:56 PM
Anyone use these? there only $229.00 with shafts and hardware Seems to good to be true TX shawn

RD

#1
December 30, 2007, 11:48:26 PM
i believe they are only warrantied and expected to be used with up to a specific lift of cam... maybe .525"?  I have not used them though.
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

RallyeMike

#2
January 02, 2008, 12:07:01 AM
I'm using the 1.6's on a .510 lift cam. One of the bolts supplied with the kit broke after about 300 miles of road racing. Upon examination, it had inclusion in the steel which caused a weakness in the bolt shaft. I sent everything back and they stepped up and replaced everything, although I was stuck with the rest of the fixit bill.

The rockers seem to be pretty well made, and I have had no problems related to the rockers themselves. I would definitely not use the supplied bolts! Buy ARP's.

1969 Charger 500 #232008
1972 Charger, Grand Sport #41
1973 Charger "T/A"

Drive as fast as you want to on a public road! Click here for info: http://www.sscc.us/

Belgium R/T -68

#3
January 02, 2008, 02:58:14 AM
Quote from: oldsnofear on December 30, 2007, 11:29:56 PM
Anyone use these? there only $229.00 with shafts and hardware Seems to good to be true TX shawn

Where did you intend to buy them? I can't see any picture.  ;)
Charger -68 R/T 500 cui Stroker
Print
Go Up Pages1
User actions