need new wheel studs

[charger2fast4u]

i need new rear wheel studs i have a 68 charger with a 8 3/4 rear what size threading and knurl do i need to get and what name brand do you's prefer

[moparguy01]

if your not racing you should be able to get any 1/2x20 lug studs. I've got the long ones from moroso on my car.

[charger2fast4u]

i'll just be on the street driving. so i should just get the 3'' one's? what size knurl will i need

[NMike]

knock out an old one and take it to the parts store. they should be able to match it up. if it is the left hand threads they probly will have to order it in for you.

[moparguy01]

if your putting new studs in and dont care about originality i'd pitch the damn left handed thread ones and go with the same on all 4 corners. at least if you ever take it to the tire shop they wont snap off your leftie studs.

[Charger1973]

Napa has a book they can order that stuff out of too.  Youd be suprised at the stuff they can order that other parts stores cant. 

[charger2fast4u]

what studs have the left hand threads on? i didn't really want to have to go to the store and match them up and all i was hoping  to be able to order them online and have them shipped with the rest of my parts i'm ordering.

[moparguy01]

all drivers side studs up to i think 1970 had left hand thread. passenger side was the normal thread

[charger2fast4u]

my studs must have been replaced before they are all normal threads. anyone know what size stud  knurl i need for a 68 charger 8 3/4 rear? 

[gtx6970]

my studs must have been replaced before they are all normal threads. anyone know what size stud  knurl i need for a 68 charger 8 3/4 rear? 

Rears only ?
Dorman # 610-104 left hand threads
and 610-103 right hand threads
I have  Both in stock if you need them

[Daytona R/T SE]

Ok, I might be the odd one here, I like the left-handed threads on my old mopars, and it's not a problem for me because I would NEVER let one of those tire store monkeys touch one of my cars...If I need a tire mounted, balanced, etc. I leave the car at home on jackstands and take the wheels into the monkeys...My question is this:  Is it possible to put left handed lugs on the later model disc brake rotors? I bought one of those disc brake kits and it uses '85 Chrysler Fifth Avenue rotors....I would love to press out the RH studs in one of the rotors and press in a set of LH studs like mother Mopar intended...Anybody ever tried this? Does such a stud exist? Am I totally nuts? 

[charger2fast4u]

just the rears. i am trying to find out what size the knurl is so i can order ARP studs from jegs with the rest of my parts i'm getting thanks anyways though gtx6970. nobody knows what size they are?

[Hemidog]

these are the ones i used on my rear axle:
http://store.summitracing.com/partdetail.asp?autofilter=1&part=MOR%2D46190&N=700+0&autoview=sku

[bull]

I just took mine down to the local tire shop and they matched them up for me, it's definitely not rocket science. I got rid of all my left-handed studs in the process.

[dukeboy_318]

got mine through o'rielly auto parts, cost me 15 bucks for a set of 20, i just took mine into them and they had a book too match them to and got them the next day

[gtx6970]

610-103 and 610-104
knurl outside diamter = .673