News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

68 383 compression

Started by ryan053, November 11, 2007, 02:15:25 AM

Previous topic - Next topic

ryan053

I was wondering if anyone had any specs on how far in the hole pistons are on a 1968 383.  Its a 4bbl version in my 68 charger.  I am planning on getting some eddy heads and wanted do have a ballpark figure on the piston depth so i can figure out a compression ratio.  I would rather not pull the engine and rebuild it if i dont have to.

T16

I measured 0.063" on my 69 383.. stock pistons..

oldkimmer

.....My stock 68 383 RR engine is -.020, that is positive deck height.....kim........
Back in the good old days 1968 charger rt 440 magnum . 1968  charger 383 magnum. The Beast has been Unleashed!!!!!!!!!!!!!!