News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

trans temp

Started by Belgium R/T -68, December 25, 2007, 04:40:34 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Belgium R/T -68

December 25, 2007, 04:40:34 AM

Beeing a liitle uncertain about having the right converter for my 440 rebuild and new tranny
I was thinking of mounting a tranny oiltempmeter on it. Where does it connect and what's
correct workingtemp for a 727?  :scratchchin:
Charger -68 R/T 500 cui Stroker

John_Kunkel

#1
December 26, 2007, 05:18:27 PM

The temp sender is usually installed in the side of the pan, the desireable operating range is from 160°F to 190°F.
Pardon me but my karma just ran over your dogma.

Belgium R/T -68

#2
December 26, 2007, 08:21:16 PM

Thanks John!  :cheers:
Charger -68 R/T 500 cui Stroker
Print
Go Up Pages1
User actions