News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

3rd Gen New production Trunk pans

Started by CharlieCharger, March 26, 2007, 12:26:25 PM

Previous topic - Next topic

CharlieCharger

I just called auto body specialties and I was told that the pans are comming out in about 3-4 months and that they are still test fitting them..The price she told me is they will be about 115$ per side (Two piece) and she is getting a boat load of calls about them. I specifically asked about my 72, it should be 71-74..or atleast 71-72 if there is not differences between that and 73-74? I didnt get into it that much with her..but us 3rd gen guys just may have some new  hope!! :yesnod: :2thumbs:
Earth. Even the word sounded strange to me now... unfamiliar. How long had I been gone? How long had I been back? Did it matter? I tried to find the rhythm of the world where I used to live. I followed the current. I was silent, attentive, I made a conscious effort to smile, nod, stand, and perform the millions of gestures that constitute life on earth. I studied these gestures until they became reflexes again. But I was haunted by the idea that I remembered her wrong -Solaris

Nacho-RT74

74 is different because the humped gas tank... rest are the same
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

mikesbbody

thats great news about the pans now they need a bulge hood, fenders, quarters,... ;D

Charger1973

I wonder will they be making the trunk extensions too? or just the center pans...

CharlieCharger

I saw the ext`s in the online store, I did not inquire about them however.
Earth. Even the word sounded strange to me now... unfamiliar. How long had I been gone? How long had I been back? Did it matter? I tried to find the rhythm of the world where I used to live. I followed the current. I was silent, attentive, I made a conscious effort to smile, nod, stand, and perform the millions of gestures that constitute life on earth. I studied these gestures until they became reflexes again. But I was haunted by the idea that I remembered her wrong -Solaris

Fitz73Chrgr

Quote from: mikesbbody on March 30, 2007, 05:52:31 PM
thats great news about the pans now they need a bulge hood, fenders, quarters,... ;D

I think they do make quarters. not sure who does though, but I believe I've seen them somewhere multiple times.
'73 Charger - project                '70 Charger - driver                 '66 Charger - survivor

Resto thread:
http://www.dodgecharger.com/forum/index.php/topic,89803.msg1019541.html#msg1019541

AutoRust

Quote from: Fitz73Chrgr on April 05, 2007, 01:21:54 PM
Quote from: mikesbbody on March 30, 2007, 05:52:31 PM
thats great news about the pans now they need a bulge hood, fenders, quarters,... ;D

I think they do make quarters. not sure who does though, but I believe I've seen them somewhere multiple times.

Sorry, we just did an extensive search to find lower quarters for the 73-74. No one makes one. We ended up fabricating trunk extensions and lower quarters for this one
http://autorust.com/gg0.html

We do a ton of business with Auto Body Specialties, and they are looking for a good quarter to use for R & D, so far he has not had much luck, whats out there is either rusty or $7500.

You might find some N.O.S on Flea-bay, or the swap meets.  :brickwall:
Nothing to see here folks, its just a Bluesmobile

CharlieCharger

In there online store, there is lower quarter patch panels but not the whole thing, I doubt they have started making those either...Im not sure wich year, but it says 71-74..I doubt it holds any ground as of yet though. :'(
Earth. Even the word sounded strange to me now... unfamiliar. How long had I been gone? How long had I been back? Did it matter? I tried to find the rhythm of the world where I used to live. I followed the current. I was silent, attentive, I made a conscious effort to smile, nod, stand, and perform the millions of gestures that constitute life on earth. I studied these gestures until they became reflexes again. But I was haunted by the idea that I remembered her wrong -Solaris

AutoRust

Auto Body Specialties has the trunk pans now, I saw them, they look great.

:cheers:
Nothing to see here folks, its just a Bluesmobile

Fitz73Chrgr

Quote from: AutoRust on April 06, 2007, 07:59:58 AM
Quote from: Fitz73Chrgr on April 05, 2007, 01:21:54 PM
Quote from: mikesbbody on March 30, 2007, 05:52:31 PM
thats great news about the pans now they need a bulge hood, fenders, quarters,... ;D

I think they do make quarters. not sure who does though, but I believe I've seen them somewhere multiple times.

Sorry, we just did an extensive search to find lower quarters for the 73-74. No one makes one. We ended up fabricating trunk extensions and lower quarters for this one
http://autorust.com/gg0.html

We do a ton of business with Auto Body Specialties, and they are looking for a good quarter to use for R & D, so far he has not had much luck, whats out there is either rusty or $7500.

You might find some N.O.S on Flea-bay, or the swap meets.  :brickwall:

http://cgi.ebay.com/ebaymotors/73-74-Dodge-Charger-USA-DIE-STAMPED-quarter-panel-skin_W0QQitemZ110199367860QQcmdZViewItem?hash=item110199367860

I have heard very good reviews on these.  I contacted all the recent buyers of this panel, and all were impressed by the quality. 
'73 Charger - project                '70 Charger - driver                 '66 Charger - survivor

Resto thread:
http://www.dodgecharger.com/forum/index.php/topic,89803.msg1019541.html#msg1019541

Nacho-RT74

Quote from: Fitz73Chrgr on December 04, 2007, 01:47:20 PM
Quote from: AutoRust on April 06, 2007, 07:59:58 AM
Quote from: Fitz73Chrgr on April 05, 2007, 01:21:54 PM
Quote from: mikesbbody on March 30, 2007, 05:52:31 PM
thats great news about the pans now they need a bulge hood, fenders, quarters,... ;D

I think they do make quarters. not sure who does though, but I believe I've seen them somewhere multiple times.

Sorry, we just did an extensive search to find lower quarters for the 73-74. No one makes one. We ended up fabricating trunk extensions and lower quarters for this one
http://autorust.com/gg0.html

We do a ton of business with Auto Body Specialties, and they are looking for a good quarter to use for R & D, so far he has not had much luck, whats out there is either rusty or $7500.

You might find some N.O.S on Flea-bay, or the swap meets.  :brickwall:

http://cgi.ebay.com/ebaymotors/73-74-Dodge-Charger-USA-DIE-STAMPED-quarter-panel-skin_W0QQitemZ110199367860QQcmdZViewItem?hash=item110199367860

I have heard very good reviews on these.  I contacted all the recent buyers of this panel, and all were impressed by the quality. 

they are TABCO ones
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

AutoRust

Quote from: Nacho-RT74 on December 04, 2007, 09:51:04 PM
they are TABCO ones

Are they any good?
I have a 73 coming in for quarters and my customer is looking to save $$ wherever possible.

Dave
Nothing to see here folks, its just a Bluesmobile

Nacho-RT74

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html