News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Firm Feel Rear Sway Bar Kit--Exhaust pipe interference?

Started by Chatt69chgr, November 29, 2007, 11:29:00 PM

Previous topic - Next topic

Chatt69chgr

I've been looking at the Firm Feel rear sway bar kit for 62-71 B-bodys for my 69 Charger.  I like the way it is routed above the axle instead of below.  My question is: has anyone installed this and what issues did you run into as far as clearance with the stock exhaust pipes. 

A secondary question--------I don't think Chrysler made a rear swaybar available for the 69 Charger.  Would a swaybar from another late 60's or 70's rear drive Chrysler product fit the 69 Charger?  I have a 8-3/4 rear end. 

BrianShaughnessy


While I don't own the rear FF bar...  I have seen and wrenched on the Bold Beeper and the FF rear bar is sweet.   That still has 8 3/4 and 3" TTI exhaust and everything fits well.   

I do own the front 1 1/8" FF and it's definitely a nice setup.   I'd wholeheartedly recommend that over the cheaper stuff on the basis of the mounting brackets alone.
Black Betty:  1969 Charger R/T - X9 440 six pack, TKO600 5 speed, 3.73 Dana 60.
Sinnamon:  1969 Charger R/T - T5 440, 727, 3.23 8 3/4 high school sweetheart.