News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

What parts am I going to need to swap gears in my rear end?

Started by 2Gunz, November 29, 2007, 04:23:27 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

2Gunz

November 29, 2007, 04:23:27 AM


What will I need to swap gears other than the ring and pinion.

I would like to order the parts from Summit.

Its the 41 version of the 8 3/4

Rolling_Thunder

#1
November 30, 2007, 12:20:03 AM
you might be SOL on the gears - the 741 case has a limited aftermarket gear selection - Yukon Gear is your best bet as a direct source
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

2Gunz

#2
November 30, 2007, 02:24:06 AM


I found the gears from ringpinion.com

Just need to know what other parts I will need....

Like seals and bearings or anything like that.

dukeboy_318

#3
November 30, 2007, 06:28:06 AM
get a  gear install get from Summit, thatll have everything you'll need to get the spacings right and includes new bearings.
1978 Dodge Power Wagon W200 4x4- 408 stroker/4spd
1974 Dodge Dart Swinger. 440 project in the works.

Nacho-RT74

#4
November 30, 2007, 10:18:28 AM
just in case I have 3:55 and 3:91 ratios rings and pinion to 741 original mopar NOS.

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Print
Go Up Pages1
User actions