News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Replacing the filler panel....

Started by 69Charger_440, November 24, 2007, 10:18:54 PM

Previous topic - Next topic

69Charger_440

Have a question from the guys who do body work.  I recently bought the filler panel from Gunslinger, which sell the AMD products.  Anyhow, when replacing this panel, is it a must or would it have any effect if I DIDN'T brace the area prior to removing the original filler panel?  Would not bracing it cause this area to somehow shift or tweak?  The reason I ask is because the new filler panel seems to be off about 3/8" off from one side.  I am at wits end.  I bought the Year One replacement panel and it was off, but not as bad as the AMD product.  Anyhow, please give any advice or suggestions.  Thank you very much!!!

Fernando

Charger-Bodie

68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

69Charger_440

no sorry but if I do take them it will be for another two or three days, it is cold and drizzly out here in Texas and the forecast calls for this type of weather for another couple of days.