950 proform HOLY CRAP what a diff!!

[skip68]

I want one.   

[Mick70RR]

Duey, the Performer RPM is about an inch higher than stock. When I fitted it I had to weld a couple of one inch pieces in the stock cable bracket. Here's a picture, but I have since connected the cable one hole lower because I wasn't getting full throttle.

[firefighter3931]

Hey Guys, Holley makes a mopar specific bracket that should be used with any 4150 style carb...this will make things much easier and eliminate a lot of headaches....the link has instructions too ! 

http://holley.com/20-7.asp


Sorry, i should have thought of this earlier 



Ron

[Mick70RR]

I've seen those before Ron, maybe I should give one a try because the throttle feels a little too sensitive at the moment.

[Duey]

Thanks, Mick, Ron.  Nice welding, Mick, can barely see the extensions.  I think I should be good with the Street Dom...it's a pretty low-profile piece.

Cheers,
Duey

[firefighter3931]

I've seen those before Ron, maybe I should give one a try because the throttle feels a little too sensitive at the moment.

Ya Mick, go ahead and get one. These levers are specific to a Mopar throttle linkage assembly....designed to allow for full throttle when the pedal is on the mat. 

Basicly it gives you the proper throttle "ratio" (for lack of a better term) when using a 4150 carb and a Mopar accelerater pedal/cable assembly. 


Ron

[Charger-Bodie]

Hey Guys, Holley makes a mopar specific bracket that should be used with any 4150 style carb...this will make things much easier and eliminate a lot of headaches....the link has instructions too ! 

http://holley.com/20-7.asp


Sorry, i should have thought of this earlier 



Ron

Thats actually what I used Ron ,I just didnt quite like the way it lined up,so i modified it a little. Now it works cherry!!

[firefighter3931]

Thanks, Mick, Ron.  Nice welding, Mick, can barely see the extensions.  I think I should be good with the Street Dom...it's a pretty low-profile piece.

Cheers,
Duey

Hey Duey....good to see ya home ! 

We'll have to hook up sometime soon for a few cold ones ! 



Ron

[firefighter3931]

Hey Guys, Holley makes a mopar specific bracket that should be used with any 4150 style carb...this will make things much easier and eliminate a lot of headaches....the link has instructions too ! 

http://holley.com/20-7.asp


Sorry, i should have thought of this earlier 



Ron

Thats actually what I used Ron ,I just didnt quite like the way it lined up,so i modified it a little. Now it works cherry!!

Brian, i thought that you had used the 20-7 bracket but wasn't 100% sure.

Judging by your original report there's no doubt that you've got it dialed in just right 



Ron

[Charger-Bodie]

Hey Guys, Holley makes a mopar specific bracket that should be used with any 4150 style carb...this will make things much easier and eliminate a lot of headaches....the link has instructions too ! 

http://holley.com/20-7.asp


Sorry, i should have thought of this earlier 



Ron

Thats actually what I used Ron ,I just didnt quite like the way it lined up,so i modified it a little. Now it works cherry!!

Brian, i thought that you had used the 20-7 bracket but wasn't 100% sure.

Judging by your original report there's no doubt that you've got it dialed in just right 



Ron

I wouldnt say its dialed in perfect but it runs REALLY well . Id love to see it DIALED in by someone like you who really knows whats going on!! EH HMM that would be you Ron! Planning any trips to Iowa this spring?

[Duey]

Ron, just ordered in the Holley 20-7 link, $10 at PartsSource -- and to think I was going to try and fab one... 

Cheers,
Duey

[firefighter3931]

I wouldnt say its dialed in perfect but it runs REALLY well . Id love to see it DIALED in by someone like you who really knows whats going on!! EH HMM that would be you Ron! Planning any trips to Iowa this spring?

Brian, i will be flying over  Iowa on the way down to Vegas this spring 



Ron

[firefighter3931]

Ron, just ordered in the Holley 20-7 link, $10 at PartsSource -- and to think I was going to try and fab one... 

Cheers,
Duey

Now that's a deal ! 

Ten bucks barely buys 2 gallons of gas these days 



Ron