News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Hub to hub and Front unibody on a 68-70 Charger

Started by Blown70, September 29, 2005, 12:52:28 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Blown70

September 29, 2005, 12:52:28 PM
I need to know the stock hub to hub width of a Charger and the front unibody measurement either inside or outside.

THANKS

Blown70

#1
September 29, 2005, 10:03:21 PM
Ok ok,  am I gunna have to pay someone to do this.... ???  wait a guy has a 70 at the media blaster here....well if anyone does have this info it would help me a ton right now.

THANKS

Troy

#2
September 29, 2005, 10:54:28 PM
I can't measure mine until at least Saturday so unless it's in the Service Manual (probably) I can't help. Sorry.

Troy
Sarcasm detector, that's a real good invention.

Ghoste

#3
September 30, 2005, 09:00:06 AM
The fsm gives the body alignment specs but that's all.  It doesn't show hub to hub.  It's 33.92 rail to rail centerline at the front and 44 at the back if that helps.

Blown70

#4
September 30, 2005, 09:02:34 AM
Quote from: Ghoste on September 30, 2005, 09:00:06 AM
The fsm gives the body alignment specs but that's all.   It doesn't show hub to hub.   It's 33.92 rail to rail centerline at the front and 44 at the back if that helps.

Yes, that helps quite a bit.  Thanks..

Ghoste

#5
September 30, 2005, 11:33:07 AM
Are there any of the other body alignment ones you need?

Blown70

#6
September 30, 2005, 11:38:15 AM
Not at the moment.  I can get he hub to hub this weekend. I think. 

Thanks for your effort.

Tom
Print
Go Up Pages1
User actions