News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

steering coupler pin removal

Started by rudyjrusa, November 03, 2007, 10:40:45 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

rudyjrusa

November 03, 2007, 10:40:45 AM
hi - how do you remove this pin from the steering coupler???
I have a new pin that came with the kit.  thanks for any help.

y3chargerrt

#1
November 03, 2007, 11:12:03 AM
Why replace it? I can't see why it would wear out. I left it in when I rebuilt my coupler.

kamkuda

#2
November 03, 2007, 07:48:50 PM
Quote from: y3chargerrt on November 03, 2007, 11:12:03 AM
Why replace it? I can't see why it would wear out. I left it in when I rebuilt my coupler.

You should be able to pound it out but I agree, I left mine in as there was no wear in the old pin.

Nacho-RT74

#3
November 04, 2007, 02:14:25 AM
With a press... but I'm agree, when I rebuilt didn't try to replace was TOO TIGHT, and decided not to change because neither found some wear.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

rudyjrusa

#4
November 05, 2007, 08:17:32 AM
Quote from: Nacho-RT74 on November 04, 2007, 02:14:25 AM
With a press... but I'm agree, when I rebuilt didn't try to replace was TOO TIGHT, and decided not to change because neither found some wear.

thanks for your help - i left it on and placed new components around it -
Print
Go Up Pages1
User actions