approx how much hp & tq at the flywhell

[metcoll]

hey guys...just wanted your experienced opinion on this combo...440 bored 30 over trw six pack pistons lunati cam (240 & 250 @50 &547 and 520 lift) eddy rpm manifold w holley 750 dp with air horn machined off 1 3/4 hedmann headers heads 452 with 3angle valve job standard valve sizes not much porting.how much hp & tq would you guessestimate on a engine dyno....would you think a torker 2 manifold make more or less......thanks...

[mally69]

430 450      just a guess

[aifilaw]

375 at 5500 or so probably, torque would probably max in the 450 range. plus or minus based on the head work Cam choice could use help. I think the intake is fine for where its at though, the torker II would probably reduce your power under the curve. All this at the flywheel of course

[firefighter3931]

430 450      just a guess

This is pretty close....unless there is something wrong with the motor. That combo of parts is good for at least 425hp, inmo. 



Ron