CORRECT PART # FOR VEGA MOULDING CLIPS FROM NAPA

[daytonalo]

I spent a few hours searching for rear moulding clips for Vega hatch , went to a couple friends glass shop , not much in stock , because newer cars don't use the them . So i went to local Napa , bought several different metal clips and found the correct type . Napa Part #665-1319 . By the way if you have broken studs , no problem , use a stud gun or very small head trim screw like I did. I hope I posted this in the correct section ?

[moparstuart]

 they will tell you if you didnt

[BigBlockSam]

thanks bro . i needed that info. Rene

[daytonalo]

They wont fit a model by the way , only a real car

[moparstuart]

They wont fit a model by the way , only a real car

i'm sure you can make it fit  your amazing

[Ghoste]

You have a knack for periodically redeeming yourself cupcake.  (that's a compliment by the way)

[nascarxx29]

I used to get the correct master cylinders and such from Napa.Never went there for body shop hardware.Good find

[daytonalo]

MAMA , I'M A BIG BOY !!!!!!!!!!!!

[nascarxx29]

This place is were I got  some automotive hardware.Back when you used a catalog
http://www.auveco.com/
Napa online catalog
http://www.napaautoparts.com/MasterPages/NOLWelcome.aspx