help rewiring problem on my rear lights on my 68***hey mods please delete got it

[chargerman68]

rewiring my car with a painless harness.just wondering how the lights hook up.-

do both light blink when turn signal is used
there is no reverse light wire on the harness as i can see


thanks for the help

[Nacho-RT74]

will be great to help, but I need to know what you have in hands...

[chargerman68]

68 charger have a painless wiring harness only 2 wires to each taillight housing but know wire to back up light....have u ever used a painless they are hard as hell to fiqure out....

[Nacho-RT74]

ok. I just can say this:

green wire is one side brake/turn/hazzard function ( brighter filament )

brown wire is teh same on oposite side.

Black is parking light ( lower filament ), license plate light, sidemarkers ( on rear, fronts are black traced yellow )

Gray is constant positive to trunk light

Violet is back up lamps

blue is fuel sender.

That's the code on 3rd gens and I don't think diff on earliers.

Dunno the colors available on painless wires. The fact is you need at least those 6 wires coming from rear harness

[chargerman68]

thanks will look into it this afternoon...

[Nacho-RT74]

well... on underdash harness the violet becomes white traced and the gray becomes on pink, what is the same that feeds the dome light

[chargerman68]

well the painless harness is not colored to the org mopar colors and the stupid directions are no help.i didnt think i would need to have any of my org wiring but i have to use all the connectors to tie into the new wiring......pain in the ass is what they should call this harness

[Nacho-RT74]

ok, then make this... check which color wires matches from painless wiring on to turning switch harness plug... in that way you'll find which wires matches with brown and dark green on to painless harness and the we'll narrow the hunt.

Noticed on a 69 wiring diagram I have, trunk light wire runs separatelly so rear harness should have at least 5 wires. Narrowed both blinkers light then will need to figure just three. Rest of wires will be easy just feeding with 12 volts and find what turns on.