News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

71 Charger Restore - I need help!

Started by Goodz, October 22, 2007, 06:02:07 PM

Previous topic - Next topic

Goodz

Long story short, the car I looked at on eBay and bought didnt show up the way it looked in the pics and I have to fix a hell of a lot more now.  Anyway, the doors need to be replaced (skins with the indents would look damn cool, but I cant find em) , the front renders (cant findany good metal repros), and the piece below the grill in front that lines up the fenders (no idea what its called nor where to look for it), and the trunk pan is fine, but the sides of the trunk are not even there.  Can you help me find some places that sell replacement stuff (or N.O.S. for this) please? 

The rest will be sheet-metalled and we will have to deal with it.  Any help given will be much appreciated. 
"If there are two ways to interpret something I said, and one of them offends you, I meant the other one."

Nacho-RT74

front valence ( where the parking lamps and licens plate are )

hard to find exterior sheetmetal to 3rdgens . sorry
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Goodz

"If there are two ways to interpret something I said, and one of them offends you, I meant the other one."

NHCharger

Nacho's right.
3rd gen sheetmetal= needle in haystack.
Try calling places like MoPar City 815-732-7751, Stephens Performance 256-247-1332, j&j Parts 904-964-5039.etc.
Watch e-bay, check out the ads and parts for sale in MCG.
You might be able to find a semi-rust free roller. Depending on what you want to spend.
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel

Nacho-RT74

right now, just apparently 73/74 quarter panels sold by TBACO what looks nice... front floor pans available on autobody specialties... trunk extenison what look needs some extra job to fit. Thats I can recall right now
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Goodz

Quote from: Nacho-RT74 on October 22, 2007, 06:44:39 PM
right now, just apparently 73/74 quarter panels sold by TBACO what looks nice... front floor pans available on autobody specialties... trunk extenison what look needs some extra job to fit. Thats I can recall right now

no idea what TBACO is, but I will look into it. 

Floor pans are good (suprisingly)  LOL

I "THINK" my car actually has trunk extensions given as "extra parts", but they look very small, as if they need to be sheet-metalled as well.

Thanks NHCharger for those numbers.  I will give them a call tomorrow.  Much appreciated. 

Just remember guys, this is my first MOPAR and my first RESTORE.  I am usually smart, but quite the idiot when it comes to this. 
"If there are two ways to interpret something I said, and one of them offends you, I meant the other one."

Nacho-RT74

sorry, I mean TABCO.... there is a thread about around on general discusion.

and now is your first Mopar and starting to restore you will notice why Mopar prices are raising up!!!
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Skyview69

I have a set of front fenders and a front valance.  I will be posting the the for sale section as soon as I can get pics uploaded.

CDN72SE

1972 Charger SE

Goodz

Quote from: CDN72SE on March 06, 2008, 02:16:06 PM
'71 - '74 Front Valences now available at Jim's auto parts.
http://www.jimsautoparts.com/body_parts_front.htm#71-74%20B%20Frt%20Valance

OMG!!!!  This was a HUGE help.  It has the things I "think I need for my trunk, but whats better is I found the front valance AND the replacement deck for the rear window!!!  That's just awesome!!!  I also found a bunch of other "new" products that are coming out soon that I may need to replace as well.  Thanks again!
"If there are two ways to interpret something I said, and one of them offends you, I meant the other one."

Doright

I belive Jims auto parts is a big NO NO
Do a quik serch on them here in the general section!

71 Fenders and Quarter panels stand alone as does 72 panels
Nacho knows all the diffrences

Doright
A&P FCC 
I play with cars because Jets are way too serious to be fun any more
I have so many car projects that cars are beginning to be no fun any more

Goodz

what is a hug NO NO about it?  products?  service?
"If there are two ways to interpret something I said, and one of them offends you, I meant the other one."

Nacho-RT74

Quote from: Doright on April 02, 2008, 01:30:40 PM
71 Fenders and Quarter panels stand alone as does 72 panels
Nacho knows all the diffrences
:scratchchin:
between 71 and 72 only diff are sidemarkers

71/72 and 73/74 front valances are teh same on exterior so fits with fenders, hoewver some diff on inner attachments. Frame rail braces are diff length due the diff rail frames. Also the rear edge ( meeting with radiator core support ) is some curvy on 71/72 and flat o 73/74, but not a big deal.


Quote from: Goodz on April 02, 2008, 01:36:17 PM
what is a hug NO NO about it?  products?  service?

has been told since ever about bad service... here is the recent one:
http://www.dodgecharger.com/forum/index.php/topic,41842.0.html
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Goodz

thanks for the advice, and the warning about Jims. 
"If there are two ways to interpret something I said, and one of them offends you, I meant the other one."

Doright

Nacho
Just my opinion and all BUT any one playing with the 71-72 with Basic body skills wouldnt be able to modify either one by them selves to make into the panel they need. Thats why I say each one stands alone.

I personaly prefer the 71 marker lights and I have all the equipment to do the conversion but not enough experiance to do it or enough cash to have it done so....Going from 72 too 71 not me, Going from 71 too 72 that I might be able to do but I would look for the right panels first.

Its just my opinion

I wish My 72 wasnt so dam rare I would try, Perhaps when I find a 400 car I can afford with the same options
Doright
A&P FCC 
I play with cars because Jets are way too serious to be fun any more
I have so many car projects that cars are beginning to be no fun any more

4aThrill

here is another place never used them just heard of them today though http://www.autometaldirect.com/index.php I check them out sounds to good to be true but I also heard that there making the rear quarter patch pannels for the 71 Charger and they will be out soon.  :drool5: :cheers:

moparmusclecars

I spoke with Auto Metal Direct on the phone. The lower valance that you spoke of buying from Jim's is coming from them if I'm not mistaken. He is advertising all kinds of their parts but he can't get them yet either. Might wanna check into that. They intend on making lots of parts and I've heard good things so far. I'm waiting on them to make several pieces for me now, and I will buy them once available. As of now, many of these sheetmetal parts are yet not available. Check Jim's part number I think his is one that is something like AMD something (numbers). Anyway, that's my 2 cents, hope I've helped a little.  Lyle

Nacho-RT74

Quote from: Doright on April 03, 2008, 01:59:06 PM
Nacho
Just my opinion and all BUT any one playing with the 71-72 with Basic body skills wouldnt be able to modify either one by them selves to make into the panel they need. Thats why I say each one stands alone.

yes of course, and my post was in fact a positive REMARK about what you said... or at least was my intention
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Goodz

thanks again for all the options.  i will look into them. 
"If there are two ways to interpret something I said, and one of them offends you, I meant the other one."

MoParMetal

i have an extra set of doors from a 71 that i dont need.
they have good glass, a couple of small dents.
i didnt see any surface rust when we stripped and primered them.
if you are interested let me know and i will take pictures.
looking for another one
xbox gamertag: mprmtl