Daytona Headlight Door Adjustmemts ??

[Daytona R/T SE]

Can someone educate me on Daytona headlight door adjustments ?

I see the cam is adjustable fore and aft, and I know the up and down stops are adjustable, but is there

another place for adjustment that I'm missing ? 

I see a lot of these cars with their headlight doors all out of whack 

I'm about to start fabricating my headlight buckets and if there's some additional adjustments I can

include to improve on Creative's original design I'm open to suggestions.

I'm thinking the cams need to be adjustable fore and aft AND up and down ?

Any long time owners of these cars ever said anything like:  Man! I wish I could just move the headlight

door like "this"   

[nascarxx29]

The original doors do tend to warp over time hard to get them perfect.Make sure the pivot bushings are good.And loosen pivot end caps to adjust .

[daytonalo]

I had the same dilemma 2 years ago , I made my own pivots that can adjust fore and aft , up and down . Basically my pivot once in desired location , I twist it , locking it in location .

[Daytona R/T SE]

That's a good idea, Larry. I might just have to copy that 

[daytonalo]

I forgot , Patent pending !!!!!!! 

[Daytona R/T SE]

The check is in the mail 

[nascarxx29]

The stock pieces shown in picture only allow you to adjust by the given slots.Ive had to rotate the cap to different positions. to find best results

[3--Daytona]

   
   Headlight doors can be real,,,FUN,,  I had to enlarge the slots on mine, I used a rattail file that was  just the righ size.  Only took us 3 days to get them where we wanted them.
    You probably will say,   ( OH FIDDLE FATLE ) before you get done.         
                                                                                                     3-daytona

[A383Wing]

   
   Headlight doors can be real,,,FUN,,  I had to enlarge the slots on mine, I used a rattail file that was  just the righ size.  Only took us 3 days to get them where we wanted them.
    You probably will say,   ( OH FIDDLE FATLE ) before you get done.         
                                                                                                     3-daytona

Same here when I did mine....was very tedious & took a lot of fine tuning.....but I got the gap almost perfectly the same all the way around the headlight bucket.

Bryan