74 steering wheel rubber piece

[rudyjrusa]

hi - were can i buy this rubber piece with the 4 holes in it new??

[Nacho-RT74]

several cars use the same... I think Toyotas.

never have seen on line, just the thick rubber puck, not the thin one.

[rudyjrusa]

several cars use the same... I think Toyotas.

never have seen on line, just the thick rubber puck, not the thin one.

i called Tom of R/T specialties - he is looking into it - i hope he can find one.

[Charger74]

Might even check with local dodge dealer.  It's called a steering coupler.

[rudyjrusa]

Might even check with local dodge dealer.  It's called a steering coupler.

i will call my local dodge dealer and see if they carry one.  thanks

[Nacho-RT74]

there are 3 kinds of couplers...

the metallic one with blocks and everty think else, what works like a cross joint. Couples directly to steering box stud in mostly of cases. Assemblied in ALL mopars
the think rubber coupler
and the thicker one with metallic inserts

[rudyjrusa]

there are 3 kinds of couplers...

the metallic one with blocks and everty think else, what works like a cross joint. Couples directly to steering box stud in mostly of cases. Assemblied in ALL mopars
the think rubber coupler
and the thicker one with metallic inserts

it is called a rubber rag joint steering coupler - i think one of the mopar dealers online has one - i will call him up today.

[Nacho-RT74]

sellers used diff names to everyone so I never know how is correctly called

[rudyjrusa]

there are 3 kinds of couplers...

the metallic one with blocks and everty think else, what works like a cross joint. Couples directly to steering box stud in mostly of cases. Assemblied in ALL mopars
the think rubber coupler
and the thicker one with metallic inserts

it is called a rubber rag joint steering coupler - i think one of the mopar dealers online has one - i will call him up today.

purchased one from moparts dealer it cost around $15 dollars - now i can finish my steering wheel and place back onto car.

[no318]

Do you have the part number by chance???  Are 73 and 74 the same???

[rudyjrusa]

Do you have the part number by chance???  Are 73 and 74 the same???

i think the 73 and 74 chargers should be the same - i don't have a part number - i through the bag out - i purchased item from this website

http://www.marketworks.com/StoreFrontProfiles/default.aspx?sfid=92390

[hutch]

I see them on dodge trucks and vans at junk yards all the time.  I hate them. I wanted somehting more solid and am still looking.  Plus its too wide and rubs my header.

[Nacho-RT74]

there are two kinds, mine carries the thin... some models were with the thick with metallic inserts