News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

looking for 3 rubber mounts for wiper motor

Started by 6d9 charger, October 14, 2007, 12:39:35 PM

Previous topic - Next topic

6d9 charger

I hope someone can point me in the right direction , i need the 3 rubber mounts that go between the wiper motor and the studs on the fire wall , my motor is all cleaned up , repainted and i can not find these parts in any books . does anyone know  where i can get these parts.
thanks
pete

Nacho-RT74

I have seen them on ebay... but they are not easy to find.

I think some wiper restorer will be able to help too:
http://www.wiperman.homestead.com/

I'm pretty sure I have seen them somewhere beside ebay, but dunno remember where
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Nacho-RT74

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

6d9 charger

Thanks for the link , just ordered them , now is there a rubber seal where it meets the firewall ( i forgot )
This site is Great to anyone building a car !!!    Thanks again :2thumbs: :2thumbs: :2thumbs:

Nacho-RT74

the seal... mmmm I don't recall have seen it.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Back N Black

If you buy the firewall gasket kit it will have the rubber seal where it meets the firewall. :2thumbs: