Broadcast sheet ?, 68 Charger

[grdprx]

Howdy,  I've been trying to figure out my broadcast sheet but I'm having a hard time.  All of what I've researched shows a letter and numbers.  Mine is mostly numbers with a couple that have letters, but the letter comes second.  Are the 68's different?  The ones I've found don't have the codes I have.

I'll put my sheet up, but it's pretty faded.  So we'll see if it's readable.  I'd REALLY appreciate it if anyone can decode some or all of it.  If something can't be read, I'd be glad to check the original.  Thanks guys.

[grdprx]

Ok, that didn't work.  I'll try and type it all out.  I'll put in the option number, then the code under it.  Here goes.
                 
32-34    37-38    39    40    408    41    42    426    43-44    456    480     (Console)   487
  C6F       62        5      4      8       5     1       6        43         6       0            6           7

50    509    517    52    536    53    540    548
3       9       7       1       6      5       0        8

56    565    57    57    578    579    58    589    62    62    638
4      5       3      7      1        9       1      9       7      4       0

No Special items, on to Fleet.

        647
          7

For the Build codes, I'll have to type all that out.  I suppose these are the most important codes, right?

VAC. FIT.       25
SWAY BAR     5
RAD.              45
ENGINE          708
TRANS.          031
AXLE             239
PINION          32
WHEEL          16B
WHEEL COVERS    64
PROP. SHAFT  62
LEFT           779     -TORISON BAR
RIGHT         778     -TORISON BAR
LEFT           211     -REAR SPRINGS
RIGHT         211     -REAR SPRINGS
CLUTCH AND BRAKE BRACKET             41

FRONT BRAKE          22
SHOCKS FRNT          32
SHOCKS REAR          95
BATTERY                62
STEERING COLMN     36F
STEERING WHEEL     15I   -not sure about the "I"
STUB FRAME            ?5
ENGINE FAN             02
ENGINE FAN S?         32
RAD INLET               01
RAD OUTLET            ?1
CARBURETOR           01
CARB. CHOKE           45
CAP IDLE LABEL       42

 

[gers1968rt]

I have some info for you.
C6F- vinyl bucket seats green
395 - 3 spd auto
62- 383 4 bbl HP
404- 3.23 axle ratio
408 - sure grip
415 - rear window defogger or rear seat heater
421 - am radio
426 - rear speaker
43- tire size, ?
456- power steering
480 - dual horns
483 - bumper guards
486 - console
487 - cigar lighter
503 - carpets
509 - glove box lock
517 - hood mounted turn signals
521 - tinted glass
536 - stainless drip trough mouldings
540 - stainless belt mouldings
548 - wheel lip mouldings
564 - bucket seats
565 - rear armrests and ashtrays
573 - horn ring ?
579 - undercoating
581 - hub caps or wheel covers ?
589 - wipers
627 - battery ?
624 - suspension ?
638 - shocks ?

vac fitting 25 - ?
sway bar 5 - part no. 2462884
rad 45 - 22 inch part no. 2898045
eng. 708 - 383 4 bbl. HP ?
trans - 727 auto 3 speed ?
axle - 8.75  ?
pinion 32 - ? maybe the speedometer pinion teeth no. and if so, then the tire size could be either 7.75-14 or 8.25-14
wheel 16B - ?
wheel covers 64 - ?
prop shaft 62 - 52.07 inches part no. 2852162
torsion bar 778-9 - charger torsion bars part no. 1857778 1857779

any line marked with a ? means I don't know for sure on the exact application or size or I'm assuming. I hope this helps you out. Tell me more about your car and post some pix. Gerry

[grdprx]

Right ON!  Thanks alot!  This will really help me find the right stuff for my car.

Here's a pic of my car, the trucks isn't mine.  I figure this was a good starting point, no rust on the car.  The rear quarter had allready been fixed.  Thanks again.

[69CoronetRT]

I have some info for you.
C6F- vinyl bucket seats greencharger trim, vinyl bucket seats in green
395 - 3 spd auto
62- 383 4 bbl HPsales code indicating 383-4 bbl only. Does not tell HP or not. HP engine not available in 68 Charger with automatic
404- 3.23 axle ratio
408 - sure grip
415 - rear window defogger or rear seat heaterfront heater with defroster
421 - am radio
426 - rear speaker
43- tire size, ?7.75X14 ww tires
456- power steering
480 - dual horns
483 - bumper guards
486 - console
487 - cigar lighter
503 - carpets
509 - glove box lock
517 - hood mounted turn signals
521 - tinted glassall windows
536 - stainless drip trough mouldingsLH outside remote mirror
540 - stainless belt mouldings
548 - wheel lip mouldings
564 - bucket seats
565 - rear armrests and ashtrays
573 - horn ring ?wood grain wheel
579 - undercoatingwith insulated hood pad
581 - hub caps or wheel covers ?sales code for deluxe wheel covers
589 - wipersthree speed wipers
627 - battery ?59 amp hr
624 - suspension ?HD suspension with sway bar
638 - shocks ?HD shocks

vac fitting 25 - ?last two digits of the PN for the correct vacuum fitting
sway bar 5 - part no. 2462884
rad 45 - 22 inch part no. 2898045
eng. 708 - 383 4 bbl. HP ?engine assembly - 383-4bbl; 330 horse; B body with automatic; w/o AC
trans - 727 auto 3 speed ?last three digits of tranny assembly PN
axle - 8.75  ? assembly code for B body with 3.23 gears and SG
pinion 32 - ? maybe the speedometer pinion teeth no. and if so, then the tire size could be either 7.75-14 or 8.25-1432 tooth speedometer gear
wheel 16B - ?
wheel covers 64 - ?assembly code for deluxe wheel covers
prop shaft 62 - 52.07 inches part no. 2852162
torsion bar 778-9 - charger torsion bars part no. 1857778 1857779

[gers1968rt]

looks like i got more wrong than right.  nice and solid looking car.  gerry

[41husk]

Nice project!

[grdprx]

Thanks, and I appreciate your help Gerry & 69CoronetRT!