News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Dumb question

Started by Bob, October 12, 2007, 06:55:20 AM

Previous topic - Next topic

Bob

Ok, I know where the horn is located on the drivers side but isn't there suppose to be 2? My horn sounds very low and wimpy. :shruggy:

74 Charger, forgot to mention.

Nacho-RT74

one on each side, same location to both
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

68chrgrwife

First, the only dumb question is the one not asked......

Secondly, I know on our 68 the horns are on the passenger side and there are two......

Hope this helps.
MOPAR OR NO CAR BABY!
LOVING MY HUBBY: CHARGERMAN68
1973 DODGE CHALLENGER: SOLD :(
1968 DODGE CHARGER RT CLONE (OK, SO IT'S HUBBY'S BUT IT'S MINE TOO, RIGHT?)
2008 DODGE CHARGER
2005 DODGE MAGNUM R/T (YES IT'S GOTTA HEMI)!




Bob

Thanks all. I need to find the one on the passenger side. Are the horns suppose to be cadilac loud or just wimpy sounding?

68chrgrwife

Our's is pretty darn loud...it accidently went off because we had a short somewhere and it scared the crap out of me!!!
MOPAR OR NO CAR BABY!
LOVING MY HUBBY: CHARGERMAN68
1973 DODGE CHALLENGER: SOLD :(
1968 DODGE CHARGER RT CLONE (OK, SO IT'S HUBBY'S BUT IT'S MINE TOO, RIGHT?)
2008 DODGE CHARGER
2005 DODGE MAGNUM R/T (YES IT'S GOTTA HEMI)!




Nacho-RT74

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Bob

Then only my low is working. I was getting ready to tie the cat under the hood and yank his tail with a string. :badidea:

68chrgrwife

Quote from: Bob on October 12, 2007, 01:34:52 PM
Then only my low is working. I was getting ready to tie the cat under the hood and yank his tail with a string. :badidea:

:smilielol: :smilielol: :smilielol: :smilielol: :rofl: :rofl: :rofl: :rofl:  Poor kitty
MOPAR OR NO CAR BABY!
LOVING MY HUBBY: CHARGERMAN68
1973 DODGE CHALLENGER: SOLD :(
1968 DODGE CHARGER RT CLONE (OK, SO IT'S HUBBY'S BUT IT'S MINE TOO, RIGHT?)
2008 DODGE CHARGER
2005 DODGE MAGNUM R/T (YES IT'S GOTTA HEMI)!




71ChallengeHer

Quote from: 68chrgrwife on October 12, 2007, 03:18:09 PM
Quote from: Bob on October 12, 2007, 01:34:52 PM
Then only my low is working. I was getting ready to tie the cat under the hood and yank his tail with a string. :badidea:

:smilielol: :smilielol: :smilielol: :smilielol: :rofl: :rofl: :rofl: :rofl:  Poor kitty
:iagree: :scared:

Bob

Ok scratch the cat thing. I could not catch him anyway. I checked and where there is suppose to be a horn there is not and not even a wire to hook to one. The mounting hole is there but has never had anything bolted there. Factory screw up I believe. Now where is that cat again. Here kitty kitty.

Nacho-RT74

If you don't have a splice wire on your existant horn terminal, probably never got that passenger side horn.

Go to a junkyard and get them from any old mopar... all used same ones. Wire, just need to be spliced from the driver side horn terminal. I bet you can find some one in less than $5 :D.

Feed the cat is more expensive
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Bob

Thanks Nacho. I have mopar horns so I will run the wire over. Thanks