WHERE TO FIND QTR END CAPS WITH GASKITS AND HOOD TO NOSE SEAL

[daytonalo]

Back to work full time on car , who makes the best fitting nose to hood seal ? Also need qtr panel end caps and gaskits , forget who makes caps

Larry

[xs29j8Bullitt]

BE&A has the Qtr End Caps: http://www.beaparts.com/

Allen

[daytonalo]

Thanks cupcake ! Anyone on seal ? I guess I have to mortgage the home and go to year one .

Larry

[BigBlockSam]

it's about time you got back to work on your car. 

[kab69440]

The material that the seals are made from is very similar to those 3-hole report covers in the stationery section of most department stores. Buy a couple of those and cut to fit.

[daytonalo]

I'm talking about hood to nose seal , it's about 4 ft long .

Larry

[hemigeno]

I'm talking about hood to nose seal , it's about 4 ft long .

Larry

Didn't you also ask about quarterpanel end cap gaskets as well?

[daytonalo]

I called b -e /a today , no answer

[daytonalo]

Thank you , but I said qtr caps .  I installed valence caps when I hung the Qtrs

[nascarxx29]

You mean the alum /potmetal boomerang shaped ones that bolt on on the rear ends of the 1/4.Id have to look

[BigBlockSam]

Quarter Panel Extensions

[nascarxx29]

Those dont wear out .Only way they are no good cracked or busted off studs.Those would be in my parts car stuff pile

[daytonalo]

Your correct ! But some jackass dropped mine , broke off bottom , plus no gaskits .

Larry

[nascarxx29]

http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-70-Quarter-Panel-Extension-Gaskets_W0QQcmdZViewItemQQcategoryZ42611QQihZ011QQitemZ320168221742QQrdZ1QQsspagenameZWDVW

[moparstuart]

  dont be so hard on your self larry , your not a total jackass

[kab69440]

I'm talking about hood to nose seal , it's about 4 ft long .

Larry

Would a piece of rubber flat-roofing cemented around a thin strip of sheetmetal do the trick?

[daytonalo]

I was unaware that there were any gaskits orig installed until you guy's informed me .

Larry