68 Charger body lines

[chargerguy111]

Can someone post in detail, the correct way to sharpen up a body line?Thanks!

[bill440rt]

Try doing a simple search on this 'site, this topic has been covered many times before. 

[69hemi]

Skim coat the body line.  Put a piece of masking tape along the line.  Guide coat the panel above the tape.  Sand to the tape smoothing out the skim coat using the guide coat as well.. a guide.  Take the take off and put a new piece on the other side of the body line.  Repeat the process.  Pull off the tape then just smooth out the line and it looks great.