Turn signal Switch!!!

[pullrock]

HI All!  Love the site and am on it every day!  In the process of rebuilding my Steering column and have a question!  Does anyone know how to get that wiring harness clip off  the end of the turn signal switch?  It is making me NUTS!!!!!   Here is a picture in case I am not being clear.

Thanks again!

Eric CA
1968 Charger R/T

[keepat]

For the male spade connector use a pair of needles nose pliers to release the clip on the spade in the connector. You need a small flat pic tool for the female connectors
Pat

[pullrock]

Do you know where I can get the Small flat pic tool?

[Just 6T9 CHGR]

Sears has them or your local auto parts store.....heres a pic of a full set of the most commonly used ones

[pullrock]

Thank you!  got it apart and the new turn signal switch is on the way!  thanks for the help!!!!!  Band of Charger brothers!

[Nacho-RT74]

Sears has them or your local auto parts store.....heres a pic of a full set of the most commonly used ones

never have seen them here

[chargerman68]

think a saw a pair at napa

[PocketThunder]

Thank you!  got it apart and the new turn signal switch is on the way!  thanks for the help!!!!!  Band of Charger brothers!

Did you order it from the dealership?  What was the part number if you have it handy?  I need to get one and dont want to use year one.

thanks

Paul
in St. Paul

[PocketThunder]

Thank you!  got it apart and the new turn signal switch is on the way!  thanks for the help!!!!!  Band of Charger brothers!

Did you order it from the dealership?  What was the part number if you have it handy?  I need to get one and dont want to use year one.

thanks

Paul
in St. Paul

Found it:  Part Number 2947801 (Same as 2771802, 2857241, 2906520).

[mopar0166]

whats the hardware look like that holds the two black round piecec together in this pic?

[Corellian Corvette]

You need to small, special bolts with square heads. They lock into slots on the bottom, larger piece.

[mopar0166]

Anybody have a parts list of break down of the steering column so that i can get it back together?  i cant find anything?

[mopar0166]

heres the deal, I couldnt find the bots anywhere and after a week of search ing i made my own from tolet bolts , with just a little shorting they worked awesome!