Does anyone know if this is a factory switch on a 73?

[WH23G3G]

I'm pretty sure I pulled this switch off of my 73 interior. But it's been a couple years since I've pulled the interior apart. Does anyone recognize where it would go? And where it would plug into? Would it have been there originally?

[Ghoste]

How about glovebox lighting.

[WH23G3G]

That's where I believe I pulled out it from originally. I even see where it would go in the glove box. But is there suppose to be a lamp in the glove box? I don't see where the lamp would go.

[Ghoste]

I'm sure it was available but you'll have to get one of the 3rd gen pros to tell you where it would go.

[Nacho-RT74]

THAT'S the glovebox switch'n'socket you thought didn't have

Bulb goes inserted just right inside the back side where wire goes. In fact wire feeds directly on to the bulb chassis for a while, ground is feeded by spring inside directly to the bulb bottom contact. The bayonet end point of bulb inserts on wire terminal automatically

[Ghoste]

 Doh, (me on the right) it's the very same as the one in my car then.

[Nacho-RT74]

that's what I thought!!! I think has being the same since years!!

Am I on the left ? 

[Ghoste]

Yes, you are on the left. You probably had to shove my wife out of the way first though.  The 68-70 is different but the A-body has the same style as the 1st and 3rd gen Chargers too.

[Nacho-RT74]

Yes, you are on the left. You probably had to shove my wife out of the way first though. 

HAHA!!!

[Nacho-RT74]

Note, plug on wire is diff and 3rd gens doesn't use the lense, just to show how the bulb fits

[Beer]