No power at the coil or ballast resistor......

[Blakcharger440]

I am trying to get the 440 in my 70 Charger RT running after doing basically a complete rebuild of the whole car.  I reinstalled the wiring and I am not getting power at the coil or at the ballast resistor. Any help in trying to track down what is wrong would be great.

I have the MP electronic distributor and ignition kit on it.

The car will crank over but no power at the coil or ballast resistor.

[71_deputy]

check the bulkhead harness, connector at the bottom of the steering colunm and the ing. switch itself for power out of the brown wire( on start) dark blue on run. this is the connector that has the larger wires on it.