Complete OE level Gauge Cluster Restoration!!

[706pkvert]

If you are looking for a professional shop with extemely high quality dial refinishing and top workmanship, please check us out on the web at www.instrument-specialties.com

*Tachometers, Speedometers, Clocks, Fuel, Temp, Oil, Amp & Vacuum gauges, etc... Full cosmetic and mechanical restoration.

*All work is 100% OE level show quality.

*All our inks and paints have been color matched to NOS dials. You cannot tell a refinished gauge from NOS! Factory Silkscreened, not decals!

*All work is backed with extensive warranties.

*Tachometer upgrades to work with modern electronic ignitions, Amp gauges converted to voltmeters, voltage limiters upgraded to solid state

*Custom colors schemes, we do it all.

[706pkvert]

Charger RT

[706pkvert]

.

[resq302]

The charter temp gauge has the incorrect norm op temp reading area.

[rudyjrusa]

i used tachman.com - he did a great job on my 1974 charger instrument cluster and turnaround time was fast!

[706pkvert]

The temp dial is not incorrect. I have seen two different variations of an original Chrysler dial and this is one of them. The other is where the normal scale is centered in the middle.

Thanks

[Chatt69chgr]

It ain't gonna be cheap.  No prices listed on the website.  I guess you get what you pay for but for some of us that are not independently wealthy price is a consideration.

[706pkvert]

There are no prices listed on the web page because price depends on condition of a particular cluster or gauge. I offer a free evaluation and price quote if you send a cluster in. My pricing is very competative. You do get what you pay for and I offer nothing but high end workmanship. I also place a 5 year warranty on all gauge repairs and rebuilds, the highest in the industry.

Please let me know if anyone has any other questions. I'll be happy to help.

[BrianShaughnessy]

   What's a basic estimate and turn around time on converting a ammeter to a voltmeter for a 69?    Where are you located?

[706pkvert]

Cost would be around $125 and about 3 weeks turn around.

[resq302]

There was a TSB or a recall regarding the coolant temp gauge face.  Most of them were replaced with the correct ones.

[706pkvert]

The gauges were not very accurate when new. The only reason Chrysler changed the temp face was so that the gauge appeared to be calibrated correctly. The gauge cores are all the same and have the same asbestos wound wire inside with the same resistance. It's not a matter of what's right and wrong. It's what your car is equipped with.

Thanks

[dkn1997]

"incorrect" is correct for many cars that came with it that way.  mine was "incorrect" and when I refurbished my cluster, the kit had both types.  I put the one that reads correct in.  you can also calibrate the gauges quiet easily using the little dials in the back.  might even be possible to get an early one to read correct while maintianing the proper "incorrect" original appearance...I have done several and while most were close, a few were way way off. 

[resq302]

hmmm so maybe I can recalibrate my temp gauge that is now reading 30* to warm

Anyone have a pic of the adjustment dial in the back of the gauge?

[dkn1997]

not the best pic, but it's the 1 "holes" at 11:00 and 5:00.   there are little wheels in there with teeth. you can turn the wheels by using a small jewelers type screwdriver.  I beliieve one wheel does the lower 1/2 sweep of the needle while the other does the upper. 

[Silver R/T]

looks pretty good but unfortunately I cannot afford their work

[dkn1997]

looks pretty good but unfortunately I cannot afford their work

706pkvet is offerning "OE" level work.  This type of work, the silkscreening, odometer refacing, converting from amps to volts,  can't be duplicated at home and you get what you pay for, hence the price. 

you can restore your own with quartz clock conversion, decals, hand paint the bezels.  fine for most drivers and if you can live with a yellow odometer wheel, painted bezels, and full functionality, then you can accomplish it at home and get pretty good results.  all the info you need to at least get them functioning correct is on the net, this sight and moparts especially.  even if you have a bad gauge or 2, core clusters are cheap enough and you will find one that works. i find that the factory gauges get a bad rap for not working right, etc... mine were a bit erratic, but simply removal and reassembly fixed that.  calibration made them read correctly.  I think you can get them pretty accurate by building your own solid state limiter, calibration, and cleaning. 

I think his warranty if fantastic and the decal/paint route is not good enough for a lot of people.  plus some of us who went this way will probably get sick of it in a few years and pop for the real deal resto....

[Nacho-RT74]

If you are looking for a professional shop with extemely high quality dial refinishing and top workmanship, please check us out on the web at www.instrument-specialties.com

*Tachometers, Speedometers, Clocks, Fuel, Temp, Oil, Amp & Vacuum gauges, etc... Full cosmetic and mechanical restoration.

*All work is 100% OE level show quality.

*All our inks and paints have been color matched to NOS dials. You cannot tell a refinished gauge from NOS! Factory Silkscreened, not decals!

*All work is backed with extensive warranties.

*Tachometer upgrades to work with modern electronic ignitions, Amp gauges converted to voltmeters, voltage limiters upgraded to solid state

*Custom colors schemes, we do it all.

would you be able to convert a 150 miles speedo in to 240 Km speedo ?, not only the scale, also the counter. How much if you do?

[706pkvert]

I can make a custom KPH appearing dial but the odometer would still record in miles, there is a different odo gear that allows proper registering in KPH. I simply do not have them and would not have a clue where to obtain them. You can email me direct if you have any other question. vintageignition@yahoo.com

[Nacho-RT74]

[706pkvert]

That dial is no problem. Its the gear that I can't do. Is that your speedo? or a pic off the net?

[Nacho-RT74]

a pic of the net... a 71 R/T built for export to switzerland and returned back to USA. Was on ebay and I saved the pic.

[rudyjrusa]

how do paint the chrome or silver around the woodgrain trim piece??  having a problem re-painting trim pieces around the gauges??

[706pkvert]

The trim around the bezel is platic chrome plating. I can help you with that when you are ready. I'd be happy to re-face your speedo as the export version.

Thanks
Mike

[chargerman68]

do they retrip the odometer to zero...i only need that done

[706pkvert]

Yes I can re-set your odometer to whatever you like. Charge is $25 + shipping

[chargerman68]

sweet pm your info...

looking at my cluster may need some work done to my alt/fuel/temp guages very faded,all guages were checked for working order so no mech needing but need work with detail

[Rolling_Thunder]

hmmm so maybe I can recalibrate my temp gauge that is now reading 30* to warm

Anyone have a pic of the adjustment dial in the back of the gauge?

Wire in a 15ohm resistor in your signal wire of get a sensor from your local mopar dealership   

[poppa]

706pkvert , All my stuff "seemed" to be working .What would it be to check out 4 gauges and then reface 4 gauges and a speedo and set  speedo to 0?? 69 Charger ralley.Thanks,Poppa....

[706pkvert]

Hi Poppa, I sent you a message.

Mike