Who builds these panels? Where can I get them?

[Magnumcharger]

Shear panels, also known as inner fenders.
Also, what gauge metal are they?

[suntech]

Auto Metal Direct will have them, if i remember right!

[Magnumcharger]

Checked their website and downloaded their flyer, but it appears that nothing like this is actually being produced at this time.
Maybe on down the road aways?

[Troy]

Checked their website and downloaded their flyer, but it appears that nothing like this is actually being produced at this time.
Maybe on down the road aways?

Try calling or send an email. Many places don't update their sites immediately and anything printed is mostly useless the day the ink dries.

Troy

[jsampsell]

Magnumcharger,

Hey, this is Jeremy with Auto Metal Direct.  Those are our panels.  I actually took that picture.     The panels are out on our parts car being test fit.  Well, they've already been test fit and I believe they have already been approved, but my point is that I do not have them here to measure the gauge.  I don't know it off the top of my head.  I will say that we have put a lot of effort into making sure that all of our pieces are the same gauge as the original pieces.

Feel free to give me a call if you prefer to ask your questions over the phone.  Otherwise, I'm happy to answer any here for the benefit of the other forum members.

Jeremy Sampsell
Auto Metal Direct
866-591-8309

[jackel440]

Magnumcharger,

Hey, this is Jeremy with Auto Metal Direct. Those are our panels. I actually took that picture. The panels are out on our parts car being test fit. Well, they've already been test fit and I believe they have already been approved, but my point is that I do not have them here to measure the gauge. I don't know it off the top of my head. I will say that we have put a lot of effort into making sure that all of our pieces are the same gauge as the original pieces.

Feel free to give me a call if you prefer to ask your questions over the phone. Otherwise, I'm happy to answer any here for the benefit of the other forum members.

Jeremy Sampsell
Auto Metal Direct
866-591-8309

I tried several times to e-mail and couldn't get the address to work.I want to bugg you guys about the 3rd Gen. chargers.We need help!!!,quarters,rockers,fenders.even some good patch panels would be nice.

[Rolling_Thunder]

Yea...    I got a 1972 Plymouth RoadRunner and no 1/4 panels exist...     

[Back N Black]

Found this on E-bay

http://cgi.ebay.com/ebaymotors/INNER-FENDER-CHARGER-GTX-ROADRUNNER-SUPERBEE-68-69-70_W0QQitemZ150161090696QQcmdZViewItem?hash=item150161090696

[Magnumcharger]

Found this on E-bay

http://cgi.ebay.com/ebaymotors/INNER-FENDER-CHARGER-GTX-ROADRUNNER-SUPERBEE-68-69-70_W0QQitemZ150161090696QQcmdZViewItem?hash=item150161090696

Vell vell vell.....verry intrresting!!
It vould appear dat somebody has der panelz on der market alveddy!!

[UFO]

They are available from any supplier who carries cross canada panels.Quality wise I dont know never needed them.

[Magnumcharger]

I've seen the panels sold by Cross Canada.
No primer coating and the panels are made out of 20 gauge metal. Not to mention the contours aren't even close.
That's why I'm impressed by the new inner fenders. They actually seem close to original, and worth waiting for.

[gtx6970]

Looks like the battery J-bolt hole on the drivers side panel is out of location

[Magnumcharger]

Looks like the battery J-bolt hole on the drivers side panel is out of location

I'll gladly put up with having to weld in that hole, to have the panels made out of the right material.

[Mass_Mopar]

Always glad to see the suppliers paying attention on the forum The pieces look good