car slower after carb change

[firefighter3931]

 

[Purple440]

First word to come to mind after looking at those pics..."CLEAN"

[jg68]

First word to come to mind after looking at those pics..."CLEAN"

Thanks, heres a couple more..

[firefighter3931]

Joe, that carb is to pretty to bolt on the car 



Ron

[jg68]

I know, i didn't wany to do it, but i just had to try out my work , & i'll say i'm pretty proud of myself , it runs great, just a tad rich in the idle circuit, not much, just alittle, so i'll open up the IABs from .070" too .073", then if it still needs more, i'll install some .031" IFRs from the .033"

I'll say Ron, these QF metering blocks are soooo nice & fully tuneable, they are set up with IFR bleeds, PVRC bleeds & the elmusion holes are threaded, but thats an area left to the pros, i won't jack with them, they put the PF m.blocks to shame, those things are junk compared to the QF stuff , the Aluminum bowls i found out are made by Braswell.

So Ron, if you need any Main bodies done, i'll cut you a break or now of anyone needed it done